Incorporating the proper care and cleaning for your shutters in Plantation, FL, can ensure they look their best and stand up to the wear and tear of use. This will give you plenty of longevity in your home and help you have shutters that look like new for many years.

Just like blinds, shutters can build up with dirt and dust. They need to be cleaned regularly to ensure damage doesn’t occurs to their surface. This also helps to maintain their shine in your home. You may have shutters that are made from timber, polywood or aluminum and special care is needed for each type of material during the cleaning process.

Remove Dirt and Debris

For all three shutter materials, you can start your cleaning the same. You will need a vacuum with an attachment piece that you can slide in between the slates. Gently run your vacuum while you run this attachment along the slates of your shutters to pick up any dust and dirt that you may see. This will help ensure you get a good portion of dust off your shutters, making it easier to wash with a solution as you move forward with your cleaning process.

Washing Polywood And Aluminum Shutters

After you have finished vacuuming your shutters, you will also want to wash them. If you have polywood or aluminum shutters, the process is quite simple. You can use water or a lightly soapy solution to clean each piece of the shutters. Because aluminum and polywood are non-moisture wicking materials, you can allow the surfaces to air dry as you move along the slates.

You will want to be gentle in your washing as you don’t want to disturb the integrity of the shutters and cause any damage during the cleaning process. Work diligently and carefully, and you will have spotless shutters that look great in your home.

Washing Timber Shutters

If your home has timber shutters, additional care will need to be taken when cleaning them after vacuuming. You can use water or a lightly soapy solution, but you will want to stay away from harsh cleaners that are not designed for timber shutter cleaning. These solutions can soak into the wood of your shutters and create areas of rot that will reduce the life and look of your window treatments.

Gently wash your timber shutters with care. This will remove any residual dirt and dust that wasn’t removed during the vacuuming process. Once you have completely wiped your shutters in Plantation, FL, down, you will want to go over them again and dry any wet spots. This will reduce the potential of water seeping into the wood and damaging your shutters’ surface.

Keeping your shutters in Plantation, FL, clean and well-maintained can increase their life and make them look as pristine as the day you bought them. If you need shutter cleaning or care, contact Open House Interiors at 954-533-7445 or online at www.openhouseinteriorsinc.com.

Leave a Reply

Your email address will not be published. Required fields are marked *